Product properties

• Transparent blue-toned primer with good penetration ability.
• Provides effective anchoring and adhesion on lightly chalky and absorbent surfaces.
• Used before painting or setting up wall coverings.

USP / Special Features

• Primer
• Transparent
• Matt

Environmental information

Remove as much paint as possible from the tools before cleaning in water. Liquid paint residues should not be poured down the drain, but left at the local environmental station. Minimize your paint waste by estimating in advance how much paint you need. Take care of leftover paint so you can use it again. This is how you effectively reduce the product's environmental impact.

Product use

• Plaster, concrete, cardboard-covered plasterboard and sand-filled surfaces before setting up wall cladding or as a pigmented primer before painting with ceiling and wall paint.

Treatment

• Loose material and paint are removed by cleaning and sanding.
• Dirt, spillage, grease and chalky material are removed with Fluren 37.
• Water-soluble discoloration, nicotine and soot are cleaned with Fluren 49.
• Matt sand the substrate as needed.
• Cracks, irregularities and holes are filled.

Remark

• When old wallpaper or wall cladding is to be removed and new ones installed, priming with an anchoring primer, together with glue / glue residues, will constitute a risk of priming.
• If necessary, use Flügger Combi Primer instead.
• If the surface is overgrown, the drying time is extended, as is the risk of poor adhesion.