Wet room primer

logo

Выберите вариант

Варианты

Delivery time: 3-4 days
Transparent blue-toned wet room primer.
Used in accordance with current legislation and regulations on requirements for substrates, surface materials and water and vapor tightness. Glue and primer for setting up and priming glass fabric / glass felt. Recommended for surfaces that are exposed to particularly high functional requirements where there is varying exposure to moisture and water. Included in Flügger wet room treatment for final treatment with Flügger Wet Room Paint.
  • Primer and glue
  • Blue tinted

Территория

Опасные слова

No

Риск и т.д.

(EUH208) Contains sensitizing agent. May cause an allergic reaction. (EUH210) Safety data sheets are available for request.

Информация

Product Data Sheet Technical Data Sheet Safety Data Sheet

Время сушки

Can be repainted at 20 ° C, 60% RH (Hours): 24 Hours Cured at 20 ° C, 60% RH (Days): 28 Days

Поверхность

Concrete Cement Tiles Plaster

Заканчивать

3 m2 per liter 3 max. m2 per liter 1 minute. m2 per liter

Достигать

...

Характеристики

...

Описание продукта

logo

Product properties

  • Transparent blue-toned wet room primer.
  • Glue and primer for setting up and priming glass fabric / glass felt.
  • Recommended for surfaces that are exposed to particularly high functional requirements where there is varying exposure to moisture and water.
  • Included in Flügger wet room treatment for final treatment with Flügger Wet Room Paint.

USP / Special Features

  • Primer and glue
  • Blue tinted

Environmental information

Remove as much paint as possible from the tools before cleaning in water. Liquid paint residues should not be poured down the drain, but left at the local environmental station. Minimize your paint waste by estimating in advance how much paint you need. Take care of leftover paint so you can use it again. This is how you effectively reduce the product's environmental impact.

Применение

logo

Product use

  • Bathrooms, toilets and similar wet rooms.

Treatment

  • Loose material and paint are removed by cleaning and sanding.
  • Dirt, spillage, grease and paint-removing material are removed with Fluren 37.
  • Lime deposits and soap residues are removed with Fluren 33.
  • Hard, smooth surfaces are matt sanded.
  • Cracks, holes and irregularities are filled with Sandplast LW.
  • Suction and porous substrates are primed with Wet Room primer diluted 1: 1 with water.
  • Glass fabric / glass blanket is set up and rolled over with Flügger Wet Room primer.
  • Finished after 24 hours with 2 times Flügger Wet Room Paint.

Технические данные

logo